Haynes Forums  

Go Back   Haynes Forums > Haynes Roadster Forums > Chassis
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 23rd July 2016, 03:26 PM
RonnieH RonnieH is offline
Junior Member
 
Join Date: Feb 2016
Posts: 10
Default headlight brackets

can anyone please tell me the length of the tube for the headlight brackets? and also how far along the chassis are they welded? many thanks. Ron.
Reply With Quote
  #2  
Old 23rd July 2016, 10:27 PM
garyt garyt is offline
Senior Member
 
Join Date: Jun 2014
Location: Dufftown, scotland
Posts: 480
Default

mine are positioned directly above the upper shock mount , the length really depends on what light units you are going to use .
as you have to allow for the iva light measurements , ( I ended up cutting mine down as I used 7" headlights), so basically mark the centerline of the chassis, half the overall width (across rear arches) , subtract the iva measurement and that gives you the outside edge of your headlight, then subtract half of your chosen light diameter and that will give you the measurement to the mounting hole.
If you need me to take any measurements I can do that tomorrow , just let me know
Gary
__________________
remember we are not mad just creatively insane
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 02:06 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.